Write a Review

Easton EA70 SL Disc Front
Our popular mid-level EA70 SL wheelset is now complemented with a new EA70 SL Disc wheelset to meet the growing demand for road and cyclocross disc wheels. Centered around our battle tested X5 mountain hub from the popular Heist wheelset we created the X5 CL hub, because Center Lock has seen strong adoption on the road. This wheelset uses double butted spokes to save weight and is finished with a deep 27mm rim for enhanced wheel stiffness and power transfer. A wide 19mm internal rim width insures optimal tire profile even for wider gravel and CX tires. The wheelset come tubeless ready with tape and valves installed and is available in all axle configurations.
Origin8 Outpost Direct GoPro Mount
- CNC machined AL6061 alloy GoPro mount for handlebars or seatposts - Accepts GoPro mounting style compatible accessories - GoPro mount rotates 90° for ideal positioning of accessories - Fits 22.2mm, 25.4mm, and 31.8mm handlebars with included adapter - Fits 27.2mm, 30.9mm, and 31.6mm seatposts with included adapter
Origin8 Outpost UL Garmin Handlebar Mount
- Lightweight nylon fiber Garmin handlebar mount with 90-degree rotating mounting plate - Compatible with Garmin Edge 200, 500, 510, 520, 800, 810, and 1000 - Out-front mounting position centers the computer in front of the stem - Fits both 25.4mm and 31.8mm handlebars with included adapter
Raleigh Electric Cadent iE Step Over
The Cadent iE boasts many of the same features found on the best European, high-speed trekking electric bikes. Top on the list is the 28mph assisted top speed, making it a Class-3 e-bike. The custom structural fenders, integrated Euro-style rear rack, bright 50 AXA lights and subtle, reflective graphics all add to its practicality, safety, and style. To lend an extra measure of comfort and control, it sports a RockShox Paragon suspension fork and begs the question; why take the car? Take the Cadent.
Wheels Manufacturing Inc. Grade 300 Loose Ball Bearings
$0.02
Loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 300 — Ultegra level quality.
Wheels Manufacturing Inc. Grade 25 Loose Ball Bearings
$0.25
Loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 25 bearings are Dura-Ace or Campagnolo Record quality.
Wheels Manufacturing Inc. Ball Bearing Retainer
$1.49
Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag
Whisky Parts Co. Carbon Headset Stack Spacer
$4.50
Whisky Parts Co. Carbon Headset Stack Spacers - Lighter and cooler than alloy - UD full carbon construction - S.H.I.S. Stem Clamp Diameter: 28.6
CatEye Universal Wheel Magnet
$4.99
Wheel magnet for all CatEye cycle computers
Problem Solvers Suspension Pump Adapter
$4.99
The Problem Solvers Suspension Pump Adapter is for use with model-year 1999 to 2000 RockShox SID suspension forks. This aluminum adapter threads into the fork to add air and fine-tune the pressure.
Problem Solvers Brake Boss Plugs
$5.99
The Problem Solvers Brake Boss Plugs are perfect for when you've removed your cantilever or linear-pull brakes in order to run disc brakes or a fixie setup. These plugs thread into the empty frame bosses and lend a clean look, while also protecting the threads inside the frame from corrosion.
Wheels Manufacturing Inc. 22mm Brake Mounting Nut
$6.99
- Steel recessed brake mounting nut for thick fork crowns
Problem Solvers Cantilever Stud Repair Kit
$7.99
The Problem Solvers Cantilever Stud Repair Kit is for repairing one stripped or damaged brake post on a frame.
Wheels Manufacturing Inc. CN-R099 Cone
$7.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Cone Diameter: 15.0mm - Dust Seal Diameter: 22mm - Length: 12.7mm - 1 cone per bag COMPATIBLE HUBS: - Shimano Deore LX HB-M570 Front - Shimano Deore XT HB-M750 Front
Wheels Manufacturing Inc. CN-R102 Cone
$7.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Cone Diameter: 14.8mm - Dust Seal Diameter: 22mm - Length: 10.6mm - 1 cone per bag COMPATIBLE HUBS: - Tiagra 4400 Front - Shimano Sora HB-3300 Front - Shimano Acera HB-M330 Front - Shimano Nexave HB-T300 Front
Wheels Manufacturing Inc. CN-R024 Cone
$8.49
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Rear Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 16.9mm - Length: 15mm - 1 cone per bag Note: O-ring / seal not included. Check the seal groove closely. This cone has a narrower groove than cone CN-R002. COMPATIBLE HUBS: - 105 FH-5700, 9 speed (right side cone) - 105 SC 1051, 7 Speed Rear - RX100 A551, 8 Speed Rear - RSX 410, 7 Speed Rear - Deore LX M550, 7 Speed Rear - Deore Mtn LX M550, 7 Speed Rear
Problem Solvers 8mm Hex Crank Arm Fixing Bolt & Cap (pair)
$9.99
Problem Solvers' 8mm Hex Crank Arm Fixing Bolt & Cap replace the old bolts for your crank. Uses an 8mm hex wrench.
Problem Solvers Cable Hanger Shim
$9.99
The Problem Solvers Cable Hanger Shim lets you install a 1 1/8-inch front brake-cable hanger on a 1-inch stem (hanger sold separately). This fine shim is made of light, durable anodized aluminum.
Problem Solvers Steerer Tube Shim
$9.99
The Problem Solvers Steerer Tube Shims are for installing 1-1/8-inch diameter threadless stems on 1-inch diameter threadless forks. The shim is made of light, durable anodized aluminum and is chamfered on the ends for easy stem installation.
Thomson Stem Cap
$9.99
- Machined aluminum with three Thomson logos circling the cap
Dimension Lockring
$10.99
Dimension Basic Track Cog Lockring with 1.29-inch x 24 tpi left-hand thread. - Stainless steel - Fits all but Campagnolo and Miche hubs - Not compatible with Phil Wood hubs
Problem Solvers Brake Mounting Nut
$10.99 - $11.99
The Problem Solvers Brake Mounting Nut is for front caliper brakes that take recessed fixing nuts. This chrome-plated steel Allen nut comes in 2 long lengths so that it will grip enough threads to tightly fasten the brake on even the thickest of fork crowns.
SKS Mud-X
$10.99
Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.
Shimano 11-Speed Chain Pins
$11.00
SM-CN900-11 QUICK-LINK FEATURE - Tool-free assembly (possible) - Non-reusable - TL-CN10 BENEFIT - Easy connect - Compatible with current 11-speed chains - Quick assembly tool
Wheels Manufacturing Inc. CN-R055 Cone
$11.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - 22mm metal dust seal is pressed on cone - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Cone Diameter: 15.0mm - Dust Seal Diameter: 22mm - Length: 11.4mm - 1 cone per bag COMPATIBLE HUBS: - Shimano Nexave HB-T400 Front - Shimano Deore HB-M510 Front - STX HB-MC32/30 Front - STX Parallax Front
Origin8 In-Line Shift Cable Adjuster Kit
$13.99
Increase the precision of your shifting cables with Origin-8's Adjuster kit. From fine tuning on the stand to adjusting on the fly, these are a great addition to make sure that the shifting of your derailleur is always spot on. • Micro adjustment for shifting precision • To be used right inline with shift cables • Set of 2
WeThePeople 7000 Top Cap
$13.99
Material: premium quality 7075-T6 alloy topbolt plus washer Size: M24 x 1.5mm pitch (fits to 2011/ 2012/ late 2013 and 2014 forks) Weight: 33g (1.12oz : 0.07lbs)
Finish Line Chill Zone
$14.99
Finish Line's Chill Zone works like magic to loosen and free rusted parts! Before discarding your rusted chain or giving up on a frozen crank bolt, a sticky derailleur, or a seized seatpost, give Chill Zone a shot. Bike parts that normally need to be replaced can be reconditioned to ride another day. Chill Zone has a special refrigerant that freezes metal as low as -50°F/-45°C contracting it and breaking the rust bond. Then Chill Zone's penetrant breaks down and flushes out the rust. With Chill Zone, most rusted parts quickly regain full functionality. Plus, it lubricates, too, so you don't need to add any. - Great for frozen crank bolts, seized seat posts and rusty chains and derailleurs - Includes oils and rust inhibitors to provide lubrication and protection after use - Use: Spray the rusted part for 10 to 20 seconds and wait 2-3 minutes for the release agent to fully wick in and break the rust. For severe rust-welded parts, spray 30-60 seconds for maximum freezing effect and wait ten minutes to one hour for thorough break-down of rust. When rehabbing a bicycle chain, soak one small section at a time.
Problem Solvers Bottle Cage Height Adapter
$14.99
On a lot of frames, the bottle cage mounts just aren’t in the right place. If your bottle cage isn’t playing nice with your other accessories, Problem Solver's height-adjustable adapter might do the trick. With 45mm of fore-to-aft adjustability, you should be able to find the optimal position for your cage. -45mm of adjustability -28 oz water bottles max -Constructed of AL-6061
Finish Line Citrus Aerosol Degreaser (12-ounce)
$15.99
Finish Line Citrus Degreaser. Super strong and fast. Cuts through the toughest of carbonized grit, grease, and grime. Low surface tension for thorough penetration into all areas. 100% active, biodegradable and nontoxic.
Page 1 of 5 Next page