Write a Review

The Problem Solvers Travel Agent amplifies your braking power so that you can mix road, mountain and cyclocross brakes and brake levers. Instead of buying new levers or brakes, just install a Travel Agent and you're good to go. This trick gizmo is made of quality 6061 aluminum and is available with and without a built-in adjustment barrel. It works with cantilever brakes, road dropped handlebars, and Shimano STI and Campagnolo Ergopower levers.

Convert your Light & Motion Vis 360 (sold separately) into a head mount and use it wherever your non-helmet adventures may lead you. Excels as a running companion and great for bicycle touring as it transforms your Vis 360 into a camping headlamp.

Planet Bike's Taurus Gloves, with their breathable cotton crochet mesh backs and comfortable tricot-lined leather palms and thumbs, embody everything that has made crochet gloves favorites of many cyclists. These great gloves feature soft terry thumbs for wiping your face.

The Problem Solvers Clamp-On Cable Guides are for clamping on the rear brake cable housing on your frame when the frame doesn't have provisions for holding a full-length brake cable housing. You get 3 stainless-steel clamps and the nuts and bolts for them.

- Pair of Velcro attached bosses - Mount a water bottle cage or pump mount on any part of your frame

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance.

This is an FSA Self Extracting Crank Bolt for Hollow Carbon MegaExo Light Cranks - Designed to fit hollow carbon FSA cranks only - Includes M17 bolt, M27 self-extracting cap, and washers

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits Campagnolo / Italian rear hubs with 135mm spacing - Type: Hollow Axle - Threads: 10mm x 26tpi - Diameter: 10mm - Length: 146mm - 1 axle per bag

This is an FSA Self-Extracting Left Crank Arm Bolt for Mega Exo ATB Cranks - 30mm long - 14g - Designed to fit FSA ATB cranks only - Includes M18 bolt, M27 self-extracting cap and washers

These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work. - Engineered and manufactured in Portland, Oregon USA - High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes - Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only - Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes - King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes

A stylish reinterpretation of the classic ‘tool bidon’ as used by many pros when training, the Elite Byasi is a spacious and easy to use tool case. - Keeps your tools, tubes, keys and phone safe and dry whilst out on a ride. - Innovative divider allows you to keep your personal effects separate from your tools and spares - Standard diameter (74mm)

- 2Mm powertex neoprene that prevents nicks and scratches while reducing the noise of chain slap - Tightly stitched with heavy-Duty thread to add extra strength and durability - Jumbo: Taper (95Mm to 85mm and is 254mm in length) - Standard: Taper (85Mm to 75mm and is 254mm in length) - Super jumbo: Taper (117Mm to 107mm and is 254mm in length) - Jumbo 29er: Taper (95 Mm to 85 mm and is 295 mm in length) - Swingarm: Taper (183Mm to 175mm and is 227mm in length)

For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.

The Dimension Metal Leg Band keeps pant legs out of the gears. - Sold as a pair

Material: premium quality 7075-T6 alloy topbolt plus washer Size: M24 x 1.5mm pitch (fits to 2011/ 2012/ late 2013 and 2014 forks) Weight: 33g (1.12oz : 0.07lbs)

Wheels Manufacturing Sealed Bearing Extractor - 12mm Fits the following bearings: - 6001 - 6801 - 6901

• Replacement hoods for Cane Creek SCR5 brake levers • Soft, tacky rubber for a sure grip • Available in black or gum

- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.

The Problem Solvers Clamp-On Cable Hanger is made of light, durable anodized aluminum and fits on bicycles with 1- and 1 1/8-inch forks. A cable noodle and guide are included.

The Problem Solvers Brake Mounting Nut is for front caliper brakes that take recessed fixing nuts. This chrome-plated steel Allen nut comes in 2 long lengths so that it will grip enough threads to tightly fasten the brake on even the thickest of fork crowns.

• 4mm wall thickness in the tread area and 2mm in the rim area • ISO Diameter: 622 / road / 29" , 630 / 27" • ISO Width (mm): 28 mm , 29 mm , 30 mm , 31 mm , 32 mm • Labeled Size: 700c x 28-32 • Tube Compound: Butyl • Valve: Standard Schrader • Valve Core: Removable • Valve Length: Schrader • Valve Shaft: Smooth • Weight: 400 g

Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - 22mm metal dust seal is pressed on cone - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Cone Diameter: 15.0mm - Dust Seal Diameter: 22mm - Length: 11.4mm - 1 cone per bag COMPATIBLE HUBS: - Shimano Nexave HB-T400 Front - Shimano Deore HB-M510 Front - STX HB-MC32/30 Front - STX Parallax Front

Dimension Basic Track Cog Lockring with 1.29-inch x 24 tpi left-hand thread. - Stainless steel - Fits all but Campagnolo and Miche hubs - Not compatible with Phil Wood hubs

Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.

Customize your handlebars with new end plugs. Compatible with MTB and Road, carbon and aluminum.