Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Tools/Maintenance

Park Tool Folding Hex Wrench Set (1.5-6mm)
$13.99
Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.
Finish Line 1-Step Cleaner and Lubricant
$12.99
Need to give your bike some quick attention before you head out the door? Give it a quick shot of Finish Line's 1-Step Cleaner And Lubricant. It loosens and removes grime, while at the same time laying down a thin layer of low-friction lube that reduces drivetrain noise and premature component wear. Keeping your bike running smooth has never been easier!
Park Tool Multi Tool
$17.99
Park's Multi Tool is made of investment-cast tool steel, nickel plated for durability. It includes 3, 4, 5, 6 and 8mm Allen wrenches; 8, 9, and 10mm box wrenches; and a regular screwdriver. The tools are positioned for easy use, too.
Park Tool Crank Puller (Square Taper)
$21.99
A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.
Finish Line Wet Lubricant
$9.99 - $12.99
For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime - Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.
Park Tool Professional Cable And Housing Cutter
$45.99
Park’s Professional Cable And Housing Cutter is specifically for use on derailleur and brake cables and housing. It even makes quick work of hard-to-cut shift-cable housing. Its cold-forged, heat-treated-steel handles won't bend and its precision-ground jaws cut perfectly every time. Its dual-density molded grips are specially contoured for superior comfort and control. Plus, there’s a built-in cable-end crimper and a forming hole for reforming housing ends.
Park Tool Tire Lever Set (Set of 3)
$6.99
• Updated to be stronger, smoother, and more versatile • Features a new material and redesigned tip for easier entry into just about any tire, including tubeless • The unique design lifts the tire away from the rim and features a spoke hook to use when multiple levers are needed • This set includes 3 tire levers
Park Tool Gear Clean Brush
$8.99
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.
Crank Brothers m17
$34.99
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m17 includes: Chain tool: 8/9/10 speed compatible Spoke wrench: #0, 1, 2, 3 Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Open wrench: 8mm, 10mm Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 168g Warranty: Lifetime
Finish Line Super Bike Wash (1-Liter Bottle w/Sprayer)
$19.99
Finish Line's Super Bike Wash quickly cleans dirt, clay, road grime and chain gunk off your bike. Five different cleaning agents work together to create a high-speed cleaning system. Three different rust and oxidation inhibitors protect metal surfaces to prevent rusting. It's safe for all bike surfaces.
Park Tool Valve Core Tool
$15.99
Park's Valve Core Tool is great for tightening, removing and installing Schrader and Presta valve cores (the cores are inside the valve), and also Presta valve extenders that have 5mm wrench flats. It's a handy tool to save a tube when all that's wrong is a broken valve, and it also lets you remove valves to easily insert sealant.
Park Tool BBT-22 Bottom Bracket Tool
$24.99
The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.
Problem Solvers Suspension Pump Adapter
$4.99
The Problem Solvers Suspension Pump Adapter is for use with model-year 1999 to 2000 RockShox SID suspension forks. This aluminum adapter threads into the fork to add air and fine-tune the pressure.
Park Tool Adjusting Cap Tool
$19.99
Removes and installs crank caps on Shimano® Hollowtech II® cranks. Includes built in hook to lift the safety plate, speeding crank removal. Steel, investment cast body provides good leverage and includes an option to use with an 8mm hex wrench for removing seized caps.
Park Tool Rotor Truing Fork
$21.99
If you have a bike with disc brakes, you'll want Park's Rotor Truing Fork. It allows you to gently adjust bent and damaged disc-brake rotors. It's made from high-quality steel and features 2 laser-cut slots for precise adjustments and a vinyl handle for comfort and control.
Pedro's Green Fizz 16X Concentrate
$18.99
The Green Fizz bike wash safely, naturally, & effectively removes tough dirt & grime from the whole bike. Developed specifically for bicycle washing, Green Fizz can safely be used on any material without risk of damage or washing away grease/lube from critical parts. The pre-activated, biodegradable formula uses advanced plant-derived surfactants and incredible foaming action to reach surfaces and loosen dirt, allowing it to be easily wiped or rinsed away, leaving your bike looking like new. Free of harsh chemicals, gentle enough to use on any material, fully biodegradeable, phosphate-free, solvent-free, plant-derived, and zero-VOC. 16X concentrate options replace ready-to-use gallons and offer great value, reduction in packaging, and reduced shipping costs. - Advanced plant-derived surfactants quickly remove tough dirt and grime from the whole bike - Use on the whole bike without risk of damage or washing away grease/lube from critical parts - Safe, biodegradeable, phosphate-free, solvent-free, plant-derived, and zero-VOC
Park Tool Shop Cone Wrench
$13.99
Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.
Crank Brothers M5
$19.99
The ultimate trailside companion. This high-tensile steel multi-tool features a precise fit and finish and side grips for a secure handhold even with gloves on. The M5 includes: Hex wrenches: #3, 4, 5, 6 Screwdrivers: Phillips #2 Length: 89mm Weight: 85g Warranty: Lifetime
SwissStop Disc Brake Silencer Spray
$27.00
- Prevents and reduces brake squealing, without impairing the braking effect - Simultaneously dissipates heat - Prevents non-uniform wear - Eliminates vibration on braking
Finish Line Super Bike Wash Concentrate (16-Ounce Bottle)
$21.99
Finish Line's Super Bike Wash quickly cleans dirt, mud, clay, road grime and chain gunk off your bike. Its five different cleaning agents work together to create a high-speed cleaning system. There are also three different rust and oxidation inhibitors to protect metal surfaces from rusting and corrosion. It's also safe for all bike surfaces.
Park Tool Chain-Wear Indicator
$17.99
A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.
Park Tool I-Beam Mini Fold-Up Hex Wrench/Screwdriver/Torx Set
$24.99
Park's I-Beam Mini Fold-Up Screwdriver/Torx Set includes 1.5, 2, 2.5, 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen, a regular screwdriver and a T25 Torx tool (for disc-rotor bolts). The I-Beam conveniently fits in pockets and packs, too.
Finish Line Premium Bike Care Value Pack
$24.99
Clean bikes run smoother and perform better. Finish Line's Premium Bike Care Value Pack is a 3-pack of their best-selling products: Multi Bike Degreaser, Dry Teflon Bike Lube, and Super Bike Wash Concentrate. These three 4-ounce bottles make it easier than ever to keep your ride in premium shape.
Finish Line Citrus Degreaser (1-Gallon Jug)
$81.99
Finish Line's Citrus Degreaser was cycling's original orange peel-based degreaser and it has set the standard in bike parts cleaning since 1988. Super strong and fast-working to cut through grime and crud, it's formulated with powerful and natural citrus extracts. With Citrus your drivetrain will clean up faster and with less scrubbing whether it's covered with grease, oil or wax. Plus, you can simply rinse with water for a residue-free finish.
Park Tool Freewheel Remover
$12.99
12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.
Finish Line Bicycle Disc Brake Cleaner
Designed to leave zero residue after application, Finish Line’s Bicycle Disc Brake Cleaner displaces any moisture built up on the pad or rotor, resulting in improved and predictable braking, and reduced brake squeal. With the unique characteristic of being acetone free, Finish Line’s Bicycle Disc Brake Cleaner is strong enough to clean the dirtiest rotors, yet safe enough to use around paint, carbon fiber and plastic parts. - Engineered to rapidly clean disc brake rotors and pads - Acetone-free formula
Finish Line Dry Lubricant w/Teflon
$12.99
Finish Line's Dry Lubricant with Teflon keeps your bike running silky-smooth rain or shine. It's very thin yet extremely durable thanks to its synthetic oils and Teflon particles. Great for your chain, cables, cleats and springs, its dry surface texture minimizes the accumulation of dirt and grit. Plus, it's biodegradable. - Great for dry, dirty and dusty environments. Attracts less grime and runs clean - Holds up well in moderately wet conditions - Can be used on derailleurs, shifters, cables and brake pivot points - Finish Line's most popular and versatile lubricant
MSW Glueless Patch Kit
$3.99
Getting a flat is a pain in the butt. It's an even bigger pain in the butt if you don't have the stuff you need to get back home. These patches will help get you back to where you need to be. - Six patches - Sandpaper - Instructions included
Muc-Off eBike Waterless Wash
- No need for water, cleans and polishes in one application - Non-sticky, powder free - Long lasting luster, no residual dust or streaks
Park Tool Shop Cone Wrench (23mm)
$13.99
Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. This 23mm size fits Shimano 15mm through-axle hubs. Some applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.
Page 1 of 4 Next page