Tools

$10.99
Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across.
- Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings
- Fits the SRAM XX1 11-speed cassettes
- Also fits Shimano disc brake lockrings
- Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut

$20.99
The Park Tool FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs.
-Utilizes a 12mm guide pin to stabilize the tool during use
- Fits 12-spline cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter)
- Fits some Shimano and similar disc brake rotor lockrings

$13.99
Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across.
- Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings
- Fits the SRAM XX1 11-speed cassettes
- Also Fits Shimano disc brake lockrings
- Guide pin stabilizes tool

$17.99
A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.

$21.99
Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.

$43.99
Professional quality component hex driver precisely machined to exact standards to ensure a perfect fit on compatible component fasteners. Featuring an ergonomic, CNC machined, perfectly balanced 6061 aluminum handle hard anodized to take the rigors of everyday use.

$14.99
The Park FR-2 Freewheel Remover fits SunTour two-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel. (Not recommended for use with SunTour 4- and 6-notch freewheels.)

$24.99
The Park FR-6 Freewheel Remover fits most 4-notch BMX and singlespeed freewheels. It can be held with a wrench or vise and its narrow profile allows use without removal of cones and locknuts.

$16.99
The Park Tool Fold-Up Hex Wrench Set combines 4, 5 and 6mm hexes, a flat blade screwdriver and a T25 Torx compatible driver into one convenient fold-up tool. Its multi-position composite handle is comfortable, lightweight, slip-resistant, and 40% stronger than steel handles.

$22.99
Park's Hex Wrench Set offers 3, 4, 5, 6, 8, and 10mm Allen wrenches with chamfered tips for a great grip and easy use. The one-piece fiber-reinforced-resin handle is light, comfortable, slip-resistant, and 40% stronger than traditional steel handles.

$13.99
Park's Four-Sided Spoke Wrenches grip 4 sides of the spoke nipple so they offer an excellent grip and won't slip or round nipples when turning even the tightest spokes and/or aluminum nipples. These popular wrenches also have easy-to-hold vinyl-coated loop handles that are color-coded according to spoke size for easy identification. The loop handle makes them easy to hang on your tool board too.

$12.99
12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.

$8.99
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.

$43.99
The HCW-16.3 is a combination 15mm pedal wrench and chain whip. Use for both pedal removal/installation and for cassette removal. Chain whip features improved compatibility with 5-speed to 12-speed mountain and road bike cassettes and freewheels. The HCW-16.3 is 10.75" long (27.3cm).

$9.99
Get those heads sealing like new and reduce compressor energy waste with Park Tool's Head Seal Kit. This kit will help get rid of that hissing sound you've been hearing when it has been too long since servicing your Park Tool INF-1 or INF-2 shop inflator.
Kit includes:
- 1 #1586 Presta Seal
- 1 #1588 Schrader Seal
- 2 #1576-2 O-rings for Shuttle-valve
- 1 #1682-2 O-ring for INF-1 and INF-2 Head Adaptors

$21.99
Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.

$24.99
Park's I-Beam Mini Fold-Up Screwdriver/Torx Set includes 1.5, 2, 2.5, 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen, a regular screwdriver and a T25 Torx tool (for disc-rotor bolts). The I-Beam conveniently fits in pockets and packs, too.

$39.99
Park's I-Beam Mini Fold-Up Hex Wrench/Screwdriver/Torx Set with Chain Tool includes 1.5, 2, 2.5, 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen, a regular screwdriver, a T25 Torx tool (for disc-rotor bolts), a tire lever, spoke wrenches and a chain tool. The I-Beam conveniently fits in pockets and packs, too.

$35.99
Precisely machined for a perfect fit, this 8-notch tool removes and installs the lockring that retains front chainrings found on Bosch Gen 2 e-bike motors after the crank arm is removed.
- Fits Bosch Active Line (chainrings less than 20 teeth), Performance Line and Performance Line CX models
- For lockrings with 50mm outside diameter and 8 notches
- Replacement for Bosch 0275009003 tool
- Torque wrench compatible 3/8-inch square drive
- Constructed of 4140 heat treated steel and plated for long life

$39.99
Designed and built to remove and install the lockring that retains front chainrings found on Shimano STEPS e-bike motors.
- Fits Shimano STEPS E6100, E7000, E8000 and E9000 e-bike motor systems
- For lockrings with 54mm outside diameter and 16 notches
- Replacement for Shimano TL-FC39 tool
- 36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque
- Constructed of 4140 heat-treated steel and plated for long life

$30.99
Designed and built to remove and install Shimano direct mount chainring lockrings found on XTR 9120, XT 8120, MT900, and other Shimano direct mount systems. Precisely CNC machined from 6061 aluminum for a perfect fit and to prevent marring expensive parts.
- Machined flat face for optimal lockring engagement
- For lockrings with 41mm outside diameter and 16 notches
- 36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque
- 6061 aluminum construction

$44.99
The MTC-40 features a super strong, composite, multi-position handle, with hardened and plated tools and smooth ergonomic operation. Lightweight, compact, and perfect to carry along.
- 2.5, 3, 4, 5, 6 and 8mm hex wrenches
- T25 & T30 Torx compatible driver
- Combo cross/straight tip screwdriver
- 5- to 12-speed compatible chain tool*
- Rotor straightener
- CO2 cartridge inflator adaptor
- Bottle opener
- Key ring holder
- Weight: 217g (7.65 ounces)
*The MTC-40 chain tool will not peen Campagnolo 11-speed chain rivets (see CT-4.3 or CT-6.3)

$23.99
Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.

$20.99
Park's Multi Tool is made of investment-cast tool steel, nickel plated for durability. It includes 3, 4, 5, 6 and 8mm Allen wrenches; 8, 9, and 10mm box wrenches; and a regular screwdriver. The tools are positioned for easy use, too.

$25.99
The MT-10, 20, 30 and 40 are high quality folding take-along tools that feature forged aluminum side plates, a mix of hardened and plated tools, and smooth ergonomic operation.

$42.99
A great way to keep the benchtop organized during a repair, the OM-2 features an over-sized textured work area and raised trays for organizing small parts and hardware. Perfect for overhauling or rebuilding components such as forks, shocks, hubs, suspension linkages, derailleurs, etc.
- Measures 15 x 24.5-inches (38cm x 62cm)
- Interlocking edges allow multiple mats to be joined together
- Tear/abrasion/shock-resistant TPR construction

$58.99
Park's Oversize Adjustable Saw Guide guides a hacksaw so that you can accurately cut fork steerers, airfoil-shaped seatposts and more. The guide is made to be held in a vise and it has hardened-steel cutting slots and a secure clamp for the part you're cutting so that you make a perfect cut every time. The guide is compatible with round tubes from 1 to 1-3/4 inches in diameter and airfoil shaped parts up to 3.5 inches long. There are slots for standard and carbon-specific saw blades.

$139.99
A daily-use, shop version of Park Tool's world-famous CM-5.2 Chain Scrubber. The CM-25 features a super-tough die-cast aluminum case and handle, plus a unique brush/sponge replacement cartridge that makes it easy to keep it running smoothly and working properly. Park Tool's proven four-sided scrubbing action makes thoroughly cleaning chains quick and easy. A shop quality cleaner built to give years of constant use.
- Proven chain scrubbing technology leaves chains sparkling clean
- Durable A380 aluminum die cast case and removable handle
- Dual-sided sponges and wicking pads to help reduce drips
- Rotating brushes clean on all four sides of every link
- Brush and sponge cartridge quickly and easily clicks in and out (RBS-25)
- Locking cover with stainless steel hinge pins
- Choose drip or immersion fluid application methods
- 100% serviceable

$32.99
These shop-quality L-shaped hex wrenches have a genuine Bondhus balldriver tip on the long arm (excluding the 10mm) for hard-to-reach bolt heads and a straight tip on the short arm for high-torque applications. The HXS-1.2 includes a handy portable tool organizer/holder and it's hinged for easy access.
• Includes 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mm sizes
• Wrench tips are precision chamfered for a clean, tight fit
• Made from industrial-quality Bondhus Protanium high torque steel

$153.95
World-famous Park Tool quality wrapped up in a great set of metric combination wrenches. The MWR-SET includes 6mm to 17mm wrenches with a 12-point two-way ratcheting box end. Forged from chrome vanadium steel, chrome-plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip. Strong, comfortable, and beautiful!
- Includes 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, and 17mm wrenches