Brakes/Levers/Pads

Shimano Deore XT RT-MT800 Center Lock disc brake rotors feature an advanced heat-dissipating design. - Rotor construction uses Shimano Freeza technology to boost heat dissipation and reduce fade - Quick and easy installation with spline mount and lock ring (included) - Compatible with metal and resin pads

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

With a focus on reduced weight and cross-country tuned stopping power, Shimano SLX M7120 brakes provide intuitive modulation so that you can explore your limits with confidence. The BL-M7100 levers feature an optimized lever axle position, an additional handlebar contact point for greater stiffness, and refined ergonomics for rider comfort. At the caliper end, the BR-M7120 4-piston caliper is optimized for the toughest enduro trails. - 10% stiffer than previous generation M7000, even under high-temp conditions - Quicker brake engagement with shorter free stroke - Tool-free lever reach adjustment - I-SPEC EV Clamp Band enables optional integrated shifter setup - Includes finned metal pads

Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.

- Aluminum pad holder with R55C4 pads

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

TRP’s two piece rotors offer superior heat dissipation due to the aluminium center as well as excellent stiffness to provide you with confidence in your braking. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape during braking. Upgrade the stopping power and heat dissipation by increasing the size of your rotor giving you more surface area and leverage. SPECIFICATIONS - Sizes: 140mm, 160mm, 180mm, and 203mm - Colors: Black Center - Compatible with Centerlock hubs - Does not include lock-ring

Original equipment pads for no-compromise disc brake performance. - Pad Shape Number: 37

The HY/RD is the latest iteration of our industry-leading efforts to bring hydraulic performance to the developing road/cross disc market. Using an open hydraulic system, it's compatible with Shimano and SRAM 11 speed road shift levers. For compatibility questions, contact us to ensure this caliper will work with your existing levers. SPECIFICATIONS - Weight: 205g per caliper - True "plug-and-play" compatibility with existing cable-actuated systems - Compressionless brake housing strongly recommended for best performance - Hydraulic reservoir automatically compensates for pad wear - TRP's own semi-metallic pad. Calipers are also compatible with Shimano M525/M515 pads - 160mm rotor always recommended for front wheel - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter - For help identifying mounting type see our guide here. - Sold as a caliper only

Shimano's SM-RT64 disc brake rotors deliver powerful and consistent braking performance in all riding conditions. SHimano's Center Lock mounting system makes installing and removing disc brake rotors quick and easy thanks to the spline mount and lock ring design. - Compatible with both resin and metal pads - Includes external type rotor lockring

Your time on the bike is precious, let Shimano make it even better. Ultegra ST-R8170 brake levers bring enhanced modulation and control to every ride by employing Shimano's proven SERVO-WAVE technology. The Di2 platform untethers the shifters while delivering fast and reliable wireless shifting. BR-R8170 disc brake caliper brings a new level of control to the road cycling world with improved modulation and a quicker initial braking point. Despite its smaller construction, the system is quieter than ever and easier to maintain. - The wireless connection provides a clean cockpit, enhancing the aerodynamic effect and easy maintenance - Wider pad clearance decreases brake noise - Maintenance-friendly bleeding process - Unparalleled ergonomic features, such as raised hood peaks on levers - Brake control is optimized with light and smooth lever action - Enhanced modulation thanks to an expanded braking control area - Compatible with wireless or wired connection

6-Bolt disc brake rotor - Easy to install anti-loosen plates help secure disc brake rotor bolts in place - Resin/Metal pad compatible - Size: 160, 180, 203, 220mm

- Intuitive and powerful braking - Quicker brake engagement with shorter free stroke - Rider tunable and action-optimized cockpit - High-performance brake control - Additional contact point for a stiffer brake lever - 10 deg. rotation angle setting range for I-SPEC EV shifting lever

Converts CenterLock hubs to accept 6-bolt rotors - Available for standard Quick Release as well as Thru-Axle hubs - Extruded alloy collar with CNC shoulder pins and lock ring - Eliminates the need for rotor bolts

Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that allow the caliper to move as you install your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get excellent caliper alignment! This kit includes ultra-light titanium hardware with washers for CPS (Caliper Positioning System) mounting.

Shimano Ultegra RT800 centerlock disc rotors. - Aluminum spider - Includes standard type rotor lockring - Freeza technology, 3-layer structure with aluminum core and stainless steel outer layers and additional aluminum cooling fins reduces rotor surface temperature approximately 150 degrees Celsius compared to all-steel rotors - Requires external-type rotor lockring when installing onto 15/20mm axle hub - Hub/Disc Compatibility: Center-Lock Disc - Pad Compatibility: All Pad Compounds - Rotor Type: Two Piece

For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters

Shimano D02S Metal Disc Brake Pads keep you under control in any conditions. - Fits Saint BR-M820/810 and Zee BR-M640 calipers - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability

Avid's G2 CleanSweep Rotor utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions. This rotor is for use on a Rohloff hub.

Compatible with linear-pull and cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability. They come in standard Black plus Yellow, Red, Pink, Blue and Gray for adding a little style to your ride.

Wireless shifting and the best hydraulic disc braking anywhere, plus revolutionary eTap shift logic. What more could you want? While we could have stopped there, we went further and optimized the hood shape to fit hands of all sizes for comfortable and controlled braking from any position. AXS technology means personalization is in your hands. - AXS-enabled for easy personalization - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - Optimized hood shape fits a wider range of hand sizes - Textured shift paddles and hoods for control and comfort - Reach Adjust to personalize fit for more hand sizes

Shimano M03 Metal Disc Brake Pads - OEM pad for XT BR-M755 caliper - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability

With an all-new design, DURA-ACE BR-R9270 hydraulic calipers are our most compact yet. MONO-BODY construction ensures light weight and rigidity, proving that good things can come in small packages. With an all-new MONO-BODY construction design, high performance braking has reached a new peak. The BR-R9270 caliper drops weight while also providing increased pad clearance, ensuring a quieter ride. Lastly, a new bleeding process makes maintenance easier than ever. - One-piece structure maximizes stiffness and reduces weight - 10% wider pad clearance decreases the chance of rotor rub - Maintenance-friendly bleeding process

- For long tours these pads offer safety together with excellent performance in all situations. - For MT disc brake 2 piston - 2 single brake pads, 2 pad retaining bolts

Shimano's DXR V-Brake Levers are the choice of the pros, from the Olympics to the local race scene. They use a 2-finger design with Shimano's proven Super Linear Response system that gives you great power and feel with little effort.

The Eagle 2 is a revolutionary pad that first utilized the hardened reinforced steel internal backbone. This larger pad has been used in all areas of cycling and is a good choice when frame, wheel and fork design allow. Features: - Hardened and Plated reinforced steel backbone - Patented Angled tip plow - Water grooves - Pad-Lock washer system - Available in Threaded and 2024 Aluminum Smooth Post Black: standard compound designed for dry condition riding Red: semi-aggressive compound for good performance Salmon: aggressive compound for extreme weather conditions Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

TRP’s two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Two-piece is now combined with TRP’s new slotted rotor is design. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions. - Sizes: 140mm, 160mm, 180mm, and 203mm - Six slots to remove water, mud, and debris - Two-piece design for heat management and stiffness

SRAM's CenterLine rotors are light-weight, quiet, smooth and robust, featuring a two-piece design with an aluminum center and steel brake track.

- R50T2 compound brake pads for BR-4600 - Also fits BR-4600, BR-3400 and BR-R450 - Adjustable toe-in and contact angle - 5 pairs

Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.